メインコンテンツにスキップ

The DJI Phantom 2 is a quadcopter with an optional brushless camera gimbal produced by DJI. It has a 25-minute maximum flight time and an automatic return-to-home and landing feature but does not include a camera. It was released in December 2013.

13回答 すべてを表示

at thirty feet in the air the drone start flashing red and lands.

I calibrate my drone and everything is green and ready. starts fine and i start climbing. once i'm like 20-30 feet vertical it starts flashing red and then lands. Any ideas?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

4 件のコメント:

If rechargeable batteries power this DJI, several years of use may wear them out. Unless your owner's manual describes low battery charge and how it reacts, this may be programmed to return on low power. Rechargeable batteries have a finite life.

さんによる

This was my first thought exactly

さんによる

The battery’s still show full charge. And I tried three others.

さんによる

Pardon me but "three others"? Three direct replacement batteries? How were they charged? Other than indicators displaying fully charged can you test battery power by arresting your drone from flying and commanding vertical travel at moderate setting and time how long power is applied until battery power drains? Or can you simply remain below 20 feet and remain hovering to time battery use? What you're testing are; battery or batteries, charging system and drone electronics. Perhaps going online to DJI or DJI forums may help with others familiar with your model and issues.

さんによる

コメントを追加

1 件の回答

Usually the flashing lights mean either the drone battery its self is low or the drone is border line out of range of the controller. Have you changed controller batteries and made sure there's nothing to interfere with the signal?

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Poleyc さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 28