A way to check new display?

Question

iPhone 4 CDMA版

iPhone 4のCDMA版モデルです。修理はそのままパーツに作業をしますが、フロントガラスとLCDはユニットで交換しなければなりません。16もしくは32 GB / Model A1349。

295回答すべてを表示

kaine @kaine58592

評価: 243

4

10

投稿日: 2012年1月11日

オプション

A way to check new display?

Hello!!

I plan to soon replace my iPhone 4 screen for a color swap to red, Is there a way to just unplug the 2 ribbon cables that power the current screen and then just plug in the new one just to check it and make sure it works correctly? I would like to no because i do not want to tear the whole thing apart then put it back together just to see that the new display does not work correctly. I need help at this, can anyone maybe post direction's or maybe a link....please help,

Thanks

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

コメントを追加

1 件の回答

ベストアンサー

Xile @xile6414

評価: 931

8

5

1

投稿日: 2012年1月12日

オプション

Hi,

It is possible, what you would need to do, the guide is here:

iPhone 4 (CDMA/Verizon) Screen Replacement

step 13 is removing the cover where the connectors are and the connectors are identified in step 15

the only issue I see is that if you don't remove the display assembly the 2 cables you will be unplugging and replacing may get in the way as they lift up and point out of the top of the phone, you can then plug in the 2 new connectors but will need to support the display assembly you are testing, turn on the phone, turn it back off etc.

good luck :)

このアンサーは役に立ちましたか？

はいいいえ

スコア 4

6 件のコメント:

So is there any harm in doing this and how should i hold the new screen, also there is a cover on the LCD do i have to remove this to test the screen?

kaine さんによる2012年1月12日

there really is no harm in doing it, hold the display however is comfortable just try not to put to much pressure on the back of the lcd itself to prevent damage, you're only really holding it to make sure that the cables don't get pulled on you might be able to rest the screen on something small and sturdy instead. You can leave the plastic bits attached to test the part I usually remove these during the fitting just in case you have to return a dead part.

Xile さんによる2012年1月13日

The protector is plastic and it is one the back of the LCD,then I can plug in the new display and set it on something while testing it?

kaine さんによる2012年1月13日

Yeah that sounds right, I would leave the plastic protectors on both sides whilst testing incase you receive a dead part, all you need to ensure is you don't pull on the digitiser & LCD cables :)

Xile さんによる2012年1月14日

Thank you for all your help:)

kaine さんによる2012年1月14日

1以上のコメントを表示

コメントを追加

So is there any harm in doing this and how should i hold the new screen, also there is a cover on the LCD do i have to remove this to test the screen? — kaine
there really is no harm in doing it, hold the display however is comfortable just try not to put to much pressure on the back of the lcd itself to prevent damage, you're only really holding it to make sure that the cables don't get pulled on you might be able to rest the screen on something small and sturdy instead. You can leave the plastic bits attached to test the part I usually remove these during the fitting just in case you have to return a dead part. — Xile
The protector is plastic and it is one the back of the LCD,then I can plug in the new display and set it on something while testing it? — kaine
Yeah that sounds right, I would leave the plastic protectors on both sides whilst testing incase you receive a dead part, all you need to ensure is you don't pull on the digitiser & LCD cables :) — Xile

iPhone 4 CDMA版

A way to check new display?

1 件の回答

回答を追加する