Screen won’t work after replacement

Question

iPad Pro 12.9インチ

2015年11月11日にAppleより発売されたハイパフォーマンスタブレットコンピューターです。

131回答すべてを表示

Maggie Phifer @maggiephifer

評価: 1

投稿日: 2021年5月9日

オプション

Screen won’t work after replacement

I just replaced my screen after I shattered the entire lower half. My home button was destroyed in the process or when I broke the screen, not really sure. Well everything is put back together now and the screen won’t work. I know it’s “on” because when I plug it in it gives me the charging sound effect. I’m not really sure what I can do here. I can’t do a hard reset or even turn it off the regular way. It’s a huge bummer because other than the screen it was in perfect condition for almost 6 years old.

If anyone has any tips or ideas I would be greatly appreciative.

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

1件のコメント

You could have knocked components off around the connector or blown a backlight filter. Shine a light on the screen and see if you can see the image.

daniel さんによる2021年5月9日

コメントを追加

3件の回答

You could have knocked components off around the connector or blown a backlight filter. Shine a light on the screen and see if you can see the image. — daniel

GHOST336 yt @ghost336yt 評価: 13 1 · Answer 1 · 2021-05-09T06:02:32-07:00

最も参考になった回答

GHOST336 yt @ghost336yt

評価: 13

1

投稿日: 2021年5月9日

オプション

More than likely the backlight filter. It's pretty common with screen replacements especially if you don't disconnect the battery prior to connecting and disconnecting the screen.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

1件のコメント:

I did disconnect the battery and I can’t shine a light to it and see the screen. I’m going to try some of Steve’s suggestions and see how that goes.

Maggie Phifer さんによる2021年5月9日

コメントを追加

Steve @ifixanything 評価: 169 3 1 · Answer 2 · 2021-05-09T06:18:22-07:00

Steve @ifixanything

評価: 169

3

1

投稿日: 2021年5月9日

オプション

It maybe just needs a reset, home buttons can be replaced they will just operate at a home button without finger print feature, I suggest replacing home button then you can reset it easily.

if that does not fix then next step is to look at hardware make sure all plugs are not damaged and plugged in correctly and flex cables of new screen are not damaged.

if still not joy it could be faulty screen try another , did your old screen light up try it and see if it still lights up.

next step is logic board damage maybe back light this will require micro soldering to fix.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

コメントを追加