Fan running hard all of the time

Question

iMac Intel 24インチ EMC 2134/2211

Model番号 A1225 / Mid 2007とEarly 2008 / 2.4, 2.8もしくは3.06 GHz Core 2 Duoプロセッサ

435回答すべてを表示

Nuno Nogueira @nunon311

評価: 11

2

投稿日: 2021年1月28日

オプション

Fan running hard all of the time

Hi All!

Really need some expertise here. I have the same issue as most people here, but on an iMac 24” mid 2007 (A1225). Does anyone know what resistor i should be looking for? I replaced the CPU fan, just to find out it had nothing to do with it. Finally got to this page, but, according to the pics posted, the solutions are for a 2009 iMac…. right?

Thx

Also, i had istalled a while ago the SSD fan control and it worked fine.... since the fan gos into full speed the app shows as in the photo....

Well, it shows no info… no temps, no speeds…. nothing totally blanc….

Here’s the TG Pro outputs:

https://drive.google.com/file/d/1AuoXG6n...

https://drive.google.com/file/d/1gsM5b7g...

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

9 件のコメント

Does your fan go into full speed right at the second of power on, or does it take eg. 1/2 a boot?

Why did you disassemble it?

Did you swap HDD to SSD or anything else?

Jumme さんによる2021年1月28日

It goes into full speed from the get go, constantly.. Just changed the fan, due to the full blast and noise…

Nuno Nogueira さんによる2021年1月28日

Oh, and i swaped the left speaker too….

Nuno Nogueira さんによる2021年1月28日

Tell me what screenshots you want please if these arent useful.

Nuno Nogueira さんによる2021年1月31日

@nunon311 - Are you able to read them and have the needed tools? If not best to just replace the logic board.

Do a google search for them.

Dan さんによる2021年1月31日

4件以上のコメントを表示

コメントを追加

1 件の回答

ベストアンサー

Dan @danj

評価: 480.7千

Self employed contract worker

35

330

971

投稿日: 2021年1月28日

オプション

Did you transfer the thermal sensor from your old HDD to your SSD? Review Step 20 in this guide iMac Intel 24" EMC 2134 and 2211 Hard Drive Replacement

You should also run diagnostics from the original grey disks you got with the system. Did any errors pop?

Well we know the issue is not the fan’s as SMC is working!

But we still are encountering a SMC error condition which is the voltage sensor firing off on your logic board likely within the CPU VRM logic area.

This really needs serious circuit level diagnostics. Do you have the schematics and boardview drawings for this system? Do you have a good DVM and the skills to read and test at the component level?

Your other option is just finding another logic board to replace this one that might be the cheaper solution.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

5 件のコメント:

HI. I didnt replaced the HDD for a SSD. The thermal sensor is in the place it should be...

Nuno Nogueira さんによる2021年1月30日

I cant run diagnostics coz i dont have the disks any longer..

Nuno Nogueira さんによる2021年1月30日

@nunon311 - OK, You'll need to give another App a try to see

what it can tells us.

You'll need to get the older full version of this App TG Pro you'll need the full version contact support@tunabelly.com asking them for the older version for your OS-X version - El Capitan 10.11.6 ??

Dan さんによる2021年1月31日

Hi Dan!

Yes, im running El Capitan..

I have TG Pro installed. I took a couple of screenshots to show you, but somehow, i cant upload them…

Nuno さんによる2021年1月31日

I dont have the schematics and boardview drawings

Nuno Nogueira さんによる2021年1月31日

コメントを追加

Does your fan go into full speed right at the second of power on, or does it take eg. 1/2 a boot?

Why did you disassemble it?

Did you swap HDD to SSD or anything else? — Jumme
It goes into full speed from the get go, constantly.. Just changed the fan, due to the full blast and noise… — Nuno Nogueira
Tell me what screenshots you want please if these arent useful. — Nuno Nogueira
@nunon311 - Are you able to read them and have the needed tools? If not best to just replace the logic board.

Do a google search for them. — Dan
HI. I didnt replaced the HDD for a SSD. The thermal sensor is in the place it should be... — Nuno Nogueira
I cant run diagnostics coz i dont have the disks any longer.. — Nuno Nogueira
@nunon311 - OK, You'll need to give another App a try to see

what it can tells us.

You'll need to get the older full version of this App TG Pro you'll need the full version contact support@tunabelly.com asking them for the older version for your OS-X version - El Capitan 10.11.6 ?? — Dan
Hi Dan!

Yes, im running El Capitan..

I have TG Pro installed. I took a couple of screenshots to show you, but somehow, i cant upload them… — Nuno

iMac Intel 24インチ EMC 2134/2211

Fan running hard all of the time

Update (01/28/2021)

Update (01/28/2021)

1 件の回答

Update (01/31/2021)

回答を追加する