評価: 93
4
2
What happens is that when I press the ps button nothing turns on.After holding it for a long time it turns on.If I leave the controller unused for 1-2 days it does not turn on even by pressing the button like forever.i can use it wired without any problem.Help PLS!!
この質問は役に立ちましたか？
評価: 159.8千
11
191
368
The fault is usually caused by the conductive film going bad. One is from wear and the other reason is from liquid damage / corrosion around where the conductive film contacts with the board.
DualShock 4(CUH-ZCT1U)のボタン回路用メンブレン
There are multiple models of the conductive film so make sure to buy the compatible one. I believe there is a model / part number printed on the conductive film and logic board.
If there is liquid damage / corrosion on the logic board it’s a good idea to brush them off well with isopropyl alcohol 99% preferable with soft bristle brush gently.
このアンサーは役に立ちましたか？
I actually have a wear out flex cable of light bar does that cause any issue btw thanks for u r solution appreciate it!
That cable going from the charging daughter board that has the Lightbar LED on it is common to go faulty so I recommend replacing that first and see how it goes.
Ok thanks for the help!
@ben actually it did not happen from the first time it happened when some days passed so I will try the cleaning first!can I use spirit instead of alcohol?
@ben logic board like the film that film u r talking about?
過去 24時間: 0
過去 7 日: 4
過去 30 日: 12
今までの合計 410
1件のコメント
Anyone can help fixing it btw it’s model no is CUH-ZTC1E
Hadi Imran さんによる