メインコンテンツにスキップ

PlayStationのアクセサリの修理とサポートページです。主にコントローラー用です。修理作業には通常のプラスネジ用ドライバとこじ開けツールが必要です。

993回答 すべてを表示

Why does my ps4 controller have such extreme stick drift?

When I play a shooting game (or any game) my controller isn’t being touched but my screen is showing straight up. It’s like I’m pushing my right analog stick forward but it’s not being touched.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 2
5 件のコメント

This may or may not help you. My stick started drifting also and it is new. I had a think of what was different and realised I had moved my external hdd drive to a new place. I swapped it back and the drift stopped. (All my games are on external drives) Apparently there can be a conflict between the external hdd and the controller.

さんによる

I fully replaced the stickbox with a brand new one but the problem still persists. What do I do now?

さんによる

If you have replaced the thumb sticks then it is most likely Bluetooth interference I’ve had the same experience. Went through 4 controllers in a year not knowing the issue until I saw it on the forums

さんによる

Mine has to be Bluetooth interference, 3 controllers down. What did you find in the forums??

さんによる

@myxipk what you saw on the forums ??

さんによる

コメントを追加

2件の回答

ベストアンサー

@yates16 …your stick drift is being caused by a faulty/broken thumbstick. these are not hard to fix. here is a link to the parts and a guide on how to replace:

DualShock 4の右アナログスティック交換

このアンサーは役に立ちましたか?

スコア 0

8 件のコメント:

I fully replaced the stickbox with a brand new one but the problem still persists. What do I do now?

さんによる

heya.... i am at a loss as to what else would cause this. i would try and connect it to your pc and see if it persists this way. if it doesnt, then your controller is not the culprit.

さんによる

PS4 Controller Stick drift Perma FIX!!

READ

-i have worked on these controllers a lot and when this issue arises things u need to consider are.. 1. How long have u had the controller.... 2. Did u spill something on it... 3. Did u drop it... 4. Are u a hard thumb player... 5. Is the ANALOG STICK loose and lost its elasticity.

**SOLUTION**

***watch vids on YT for this disassembly part. (dismantling the 2 green boxes attached to the analog stick box)... BE very careful not to break any lock tabs ... AND make sure to remember the orientation of the white copper sensor base inside it or else the analog stick wont work..... clean inside if debris is gunk is visible.. THEN!.. do not just assemble white piece back inside that green box... u will notice the copper rings.. make sure u SPREAD them softly avoiding the other thin copper from touching the others.. THEN place it back inside the green plastic housing with the proper orientation. REASSEMBLE and TEST.

さんによる

I took mine apart and I notice the lock tab on the bottom is missing, but the wires was everywhere, not sure how the wires should look, I don't see a video on

yt about the green boxes and tabs .

さんによる

I also have replaced the analog module, and it stills drift.

I have shut down every bluetooth around..

I don't know what to do now..

さんによる

3件以上のコメントを表示

コメントを追加

Did you try the toggle from another old fashioned controller? they have the same pin count

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Alex Yates さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 35

今までの合計 35,605