メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

2017年6月8日に発売。A1418 / EMC 3069 / 2017 / 3.0 GHz quad-core i5, 3.4 GHz quad-core i5 or 3.6 GHz quad-core i7 Processor.

123回答 すべてを表示

Single black vertical line down display

So as the title suggests, I have a black line down the display now.

This is self inflicted as I’ve just had to chop the whole bloody thing apart to upgrade the RAM and swap out the disk for a SSD - which all works fine btw, no issues there - but the end result has been this black line down the display.

Block Image

It doesn’t appear in screenshots nor on my second monitor so it’s isolated to the display or the display data cable. I’ve tried flushing NVRAM and I’ve tried looking for any discernible breaks of blemishes in any of the cables or circuits… nothing.

Any ideas?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

選択されたソリューション

Ouch! You did your self in ;-{

In the process of removing the display you damaged the LCD panels connections along the edge. If you had gotten the special adhesive cutter which is part of this kit [リンクされた製品が存在しない、もしくは無効: IF173-005-1] it would have likely saved you.

Time for a new display assembly!

And here’s the the needed guide iMac Intel 21.5インチ Retina 4K Display (2017) ディスプレイアセンブリの交換

このアンサーは役に立ちましたか?

スコア 1

コメント:

I certainly did... ironically I did get a kit like that, it wasn't a pizza cutter though more like a little stanley knife.

I had a feeling that I'd busted the display, I have a replacement on on order now, the full unit - https://www.amazon.co.uk/gp/product/B07G... - but I've also got the display cable on order so was wondering if I could get away with just replacing that... I guess not!

Thanks for taking the time to answer.

さんによる

If you are careful you can transfer the cables over. Do re-order the needed adhesive strips! make sure you've fully cleaned off the old adhesive and clean the surfaces with reagent quality isopropyl alcohol (85% or better) Drug store alcohol is junk!

さんによる

Yeah I've scraped off all the old adhesive, but a rubbing is a good call so will get hold of some of that. Thanks.

さんによる

Incidentally, this was the kit that I bought and used for this disassembly. I guess the cutter just went in too deep. https://www.amazon.co.uk/gp/product/B01M...

さんによる

@Paul Aldred-Bann - Ah... The knife was not the correct tool here ;-{

Did you review the guides before you started??

さんによる

1以上のコメントを表示

コメントを追加

回答を追加する

Paul Aldred-Bann さん、ありがとうございました!
統計データを表示:

過去 24時間: 1

過去 7 日: 8

過去 30 日: 74

今までの合計 889