修理を始めるには コミュニティ ストア

2015年9月25日にAppleから発売されたiPhone 6Sの修理情報とガイドです。モデル A1688、A1633。

2692回答 すべてを表示

オプション

itunes error 4014 and replaced NAND already

iPhone came in with error 4014. Tried several computers and cables restoring first. Measured the voltages according to schematics and they all had value. I reballed the NAND and it gave me the same error. Checked the pads underneath and non were missing/damaged.

Placed another NAND from an icloud board and still the same error. I searched online and some say it could be BBPMU which I also replaced. I am running out of ideas. Could I have been unlucky and placed an faulty NAND

This is my first attempt fixed error 4014. Maybe I missed something?? Any tips what I could check before sending it to China for a boardswap?

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

You have to reprogram the NAND before installing it on your device. Also check your main NAND lines (PP0V9 and PP3V0) as well as PP1V8. If you remove the NAND again, check the pads in diode mode. Anything connected to the CPU should give you some kind of “normal” readings - check XW for expected readings.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

6 件のコメント:

The 3 lines all have the correct voltage. I thought I could just restore the iphone. Itunes recognizes the iphone in dfu mode. The NAND is wiped

さんによる

The NAND has to be programmed via a special programmer, such as this one: JC Pro 1000S / P7

さんによる

Oh I have this machine but the original NAND cannot be read. Thats why I wiped the new one. It doesn't work if I use a empty NAND and itunes to restore it?

I get a 4014 error when I try restoring with the empty NAND which suggests NAND problems. Is this because it's empty or is there something else causing this error.

さんによる

If you could not read the original nand you will have to manually input the IMEI number and Mac Address into your programmer and write it to the new nand.

さんによる

Late update, I took the info of an spare NAND I had and wrote its info on the wiped NAND. So I guess a nand cannot be empty when you restore??

Itunes restored the NAND without problems. It could not be activated because the serial and wifi address didn't match.I wrote the original serial and wifi address back and it asked me for the icloud info which I m waiting on so it should work now

さんによる

1以上のコメントを表示

コメントを追加
最も参考になった回答

オプション

Have you tried another charging IC (tristar)? Sometimes these can cause weird problems with restores on iPhones as that chip is responsible for USB communication and not just charging.

If not, you may want to replace the charging chip (try another charging port assembly first before doing so in case of a bad charging port).

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

1件のコメント:

It was the empty NAND that gave the error.

さんによる

コメントを追加

回答を追加する

KWH さん、ありがとうございました！
統計データ:

過去 24時間: 2

過去 7 日: 9

過去 30 日: 11

今までの合計 4,110