修理を始めるには コミュニティ ストア

2015年9月25日にAppleから発売されたiPhone 6Sの修理情報とガイドです。モデル A1688、A1633。

2693回答 すべてを表示

オプション

iPhone missing recovery mode, just Apple logo than backlight

Hello, I have a ln unusual problem with iPhone 6s.

It stuck on using and turned off. After trying to turn it on, apple logo appears and then just black screen with backlight on.

When I’m trying to go into recovery mode, it shows just black screen with backlight on.

I tried going into DFU and it success. iTunes sees it and starting to restore, on iPhone appears Apple logo with progress bar, but it won’t start filling and iTunes gets an error 6.

Tried with 2 laptops and 1 pc and 3 usb cables but get the same error.

Tried with 3utools and it starts recovering in DFU, but than it shows an error like “A problem when going from DFU into Recovery mode”.

So I’m guessing that it lost Recovery mode somehow or there is a problem with some components on the motherboard.

Anyone had similar problem?

EDIT: The new information that may be useful is that I tried with another fully charged battery from another working phone and got the same error when restoring, but when I put back that second battery in the working phone, it shows like it’s empty at first, then put it to the charger and the working phone turned on and showed full battery like it was.

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

There isn't much information with iTunes restore error 6 so I can't tell what would be causing that restore error.

That falls into the category of the NAND chip maybe being at fault, if it is at fault it would need to be removed, reprogrammed using a NaviPlus Pro 300 then placed back on to the logic board. Only people that do micro-soldering and have the NAND programmer can do that.

Usually I would go through these troubleshooting steps:

1. Try another cable and USB port on the computer

2. Use another program instead like 3UTools

3. Try another computer

For a repair shop they may try:

- Another charging port, then another battery, restore with only display cables plugged in, try with replacing U2 Tristar charging IC.

このアンサーは役に立ちましたか？

はい いいえ
スコア 4

2 件のコメント:

Thanks a lot for a detailed answer. I’m definitely gonna check everything about that.

The new information that may be useful is that I tried with another fully charged battery from another working phone and got the same error when restoring, but when I put back that second battery in the working phone, it shows like it’s empty at first, then put it to the charger and the working phone turned on and showed full battery like it was.

I doubt that charging IC is bad because it made the working battery goes crazy on the working phone. What do you think about it?

さんによる

If you have another same iPhone you could try putting the logic board in another housing that already has the parts in it and if the issue is still the same you know it's an issue that can only be fixed with microsoldering.

さんによる

コメントを追加

回答を追加する

Nikola Kuzmanovic さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 3,080