Replacing Airport Antenna Cable

Question

MacBook Pro 15インチ Retina Display Late 2013

2.0GHz, 2.3GHzもしくは2.6GHzクアッドコアIntel Core i7プロセッサ (Turbo Boost 最大3.8GHz) 6MB共有L3 キャッシュ付き。

580回答すべてを表示

illya @sixillusha

評価: 83

5

2

投稿日: 2016年12月31日

オプション

Replacing Airport Antenna Cable

I was doing a screen replacement on my Pro and managed to break off the middle antenna connector. My wi-fi still works, but the signal is definitely weaker, and bluetooth is so weak that it only detects devices sitting directly on the keyboard.

I was wondering if anybody had any experience fixing this wire without disassembling the entire display. I was thinking if I stripped it and soldered an antenna connector from another display, it would work fine.

Any ideas?

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 3

コメントを追加

3件の回答

ベストアンサー

illya @sixillusha

評価: 83

5

2

投稿日: 2016年12月31日

オプション

I ended up cutting part of the antenna cable off from a broken display, stripping both cables, soldering them together, and covering them with some electrical tape. Not the cleanest solution, but definitely the cheapest!! Bluetooth and wifi fully work now.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

2 件のコメント:

Can I know how you did that? The inner core contains silver wires and the outer part contains a copper wrap and silver mesh shielding. Is it okay for the outer meshes to touch the inner core?

just1ed さんによる2018年3月26日

have picture of it ?

danial nabil さんによる2020年10月30日

コメントを追加

Can I know how you did that? The inner core contains silver wires and the outer part contains a copper wrap and silver mesh shielding. Is it okay for the outer meshes to touch the inner core? — just1ed

Dan @danj 評価: 479.9千 Self employed contract worker 35 329 971 · Answer 1 · 2016-12-31T12:18:16-07:00

最も参考になった回答

Dan @danj

評価: 479.9千

Self employed contract worker

35

329

971

投稿日: 2016年12月31日

オプション

Ouch!

Well i've got some good news you don't need to take the display assembly apart only take it off as the antenna unit is within the clutch cover (black plastic between the hinges. Here's the IFIXIT guide to get the display assembly off: MacBook Pro 15" Retina Display Late 2013 Display Assembly Replacement. Then get this part: iSight Webcam WiFi Cable Apple P/N 818-2882. The trick here is to carefully unsolder the antenna lead you need and feed it though the hinge replacing the broken one.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

3 件のコメント:

It turns out the antenna unit is stamped shut, so it's impossible to access any of the leads without breaking it open. Check my answer for what ended up working.

illya さんによる2016年12月31日

FYI - It slides to one end and then pops off (bayonet style).

Dan さんによる2016年12月31日

No I mean the actual antenna underneath the black shroud. It's stamped shut, so you can't unsolder anything with cracking it open.

illya さんによる2016年12月31日

コメントを追加