メインコンテンツにスキップ

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

Headphone Jack/Microphone and ear speaker not working

Having strange problems with an iPhone 6.

Calls can only be heard through speaker whilst nobody can hear me. Microphone not working even with voice memos. Speaker works fine but if plug in headphone continues to play through speaker. Have replaced charge port and still same issues. Any advice? Know phone recently had a new screen replaced by another tech if that could have caused issues.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 3
コメントを追加

3件の回答

ベストアンサー

I would check for Long-Screw Damage, just in case.

There are three microphones on the iPhone 6. There is one for phone calls/front camera videos, one for noise cancellation and one for the rear camera. Check that they aren't obstructed with dust, wax etc.

Small parts are notorious for being hit or miss. Can you confirm that the replacement port is functioning?

このアンサーは役に立ちましたか?

スコア 2

6 件のコメント:

Just put another board in out of interest and all works so guessing board trouble

さんによる

Did you look to see if there is LSD?

さんによる

How would I spot this?

さんによる

The connections cover was not on phone

さんによる

Look inside the standoffs (where the screws go) circled in red in this image. (iPhone 6のロジックボードの交換)

You will need magnification to do this. Ideally a microscope but a jeweler's loupe will do. The bottom should look black. If it looks all scraped up, then it may have LSD.

さんによる

1以上のコメントを表示

コメントを追加

It's the front camera flex

iPhone 6 Front Camera and Sensor Cable

iPhone 6の正面カメラとセンサーケーブルの交換

iPhone 6 Front Camera and Sensor Cableの画像

製品

iPhone 6 Front Camera and Sensor Cable

$19.99

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

Screen works fine on other phones, all pointing towards board issue

さんによる

コメントを追加

had the same problem with a customer I replaced the charge port/mic flex and fixed all the problems

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Yeah I did the same thing but turns out it did nothing :(

The probability of this issue is on the logic board's audio IC needs to be replaced.

さんによる

コメントを追加

回答を追加する

Niall さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 9,945