メインコンテンツにスキップ

モデル番号はA1347番で2.4もしくは2.66 GHz Core 2 デュオプロセッサが搭載されています。

76の回答 すべて表示

Mac Mini beeps on boot , after HDD replacement and RAM swap?

So I just swapped in a PNY 240gb SSD into my Mac Mini and also replaced it with Crucial RAM (two 4GB sticks). When I turned it on, the Mac started beeping. (1 beep every 5 seconds). I read around saying it was the RAM, I swapped the standard back into the slots, and nothing. Is there anyway to tell if it was because I screwed up the SSD install?

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

Apple Watch キット

スクリーンとバッテリー の修理が簡単にできます。

ショップを見る

Apple Watch キット

スクリーンとバッテリー の修理が簡単にできます。

ショップを見る

1回答

選択されたソリューション

Hi Derek !

You have been well informed. A bac beeping that way on startup means that the ram was not correctly inserted. Beware, removing RAM is pretty easy to do but to replace it correctly, you need to press it firmly so it is well connected. I had the same problem the 1st time I changed RAM in a mac, just had to insert it again with a more significant amount of strength and it did the job.

In addition, I would suggest to try this after inserting the new ram :

  • Unplug your computer, and press the start button for 10s, plug it back in
  • Start your computer and immediately press simultaneously alt+cmd+r+p which resets the PRAM

Hope this helps!

この回答は役に立ちましたか?

スコア 4

コメント:

Hi Vincent! I tried everything you suggested and nothing seems to be working. I threw the old hard drive back and all it does is make the beeps take longer before they are heard (it's on it's last leg and is practically dead). Should I try purchasing new ram? Or is my ram slots fried?

による

Re-seat the RAM again, make sure you compare yours to this image: Image of a properly seated RAM module, The beep code is a RAM error so focus on that. You may had damaged the slot if you had to force the module in (hopefully not).

による

Is there anyway I can tell if I damaged the slot?

による

Without having a second one to visually compare the best I have here is the image I posted. If you want take some good clear images of the modules, slot directly in and from the side and lastly, with the module seated in the slot and paste them here so we can try to see if its damaged.

による

コメントを追加

回答を追加する

Derek Hassan さん、ありがとうございました!
統計データを表示:

過去 24時間: 5

過去 7 日: 55

過去 30 日: 412

今までの合計 4,533