修理を始めるには コミュニティ ストア

The Atari 2600 or Atari Video Computer System (VCS) is a video game console released in September 1977. The 2600 runs a MOS Technology 6507 CPU and uses ROM cartridges for storing games.

32回答 すべてを表示

オプション

Sport/Racing Controllers not responding correctly when wheel is turned

Hi All,

Just wondering how to fix the 'wheel' controllers for Atari 2600 systems. Both sets usually have the same problem, eventually they seem to wear out and the buttons will work fine, however when spinning the knob (or wheel), you might get a jitter at best as a response from this joystick.

If anyone could enlighten me, that would be great! Many thanks in advance!!

Mike E

EDM, AB, CA

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 2
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

My guess is that the contacts on the wheel have either corroded or been built up with dirt.

Pull the wheel off of its peg, and unscrew the washer holding it in place (a pair of pliers will get it open). Open the back case with a Phillips screwdriver, and pull out the variable resistor. If you look at the underside of the resisitor mechanism, there are four metal tabs. Bend them out of the way, and lift the cover off. Inside are some metal rings, these are the contacts. You can clean them with some rubbing alcohol, or remove them and brush them down with some steel wool to remove corrosion.

Good luck, let us know how it works out.

このアンサーは役に立ちましたか？

はい いいえ
スコア 4

2 件のコメント:

+

さんによる

Thanks for the quick response! I will be out of town for the next couple weeks here, but I will post back once I get the chance to crack these open.

さんによる

コメントを追加

回答を追加する

Esso さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 8

今までの合計 2,138