メインコンテンツにスキップ

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

iPhone 6 no signal

iPhone 6 bent badly at the bottom it bent the motherboard slightly near the charging connector. Said no sim even though the SIM card was still in the phone. Put the motherboard into the new housing and inserted the SIM card in keeps saying searching when I pull out the SIM card it still says searching. I'm going to try to replace the charging port beacuse it has an antenna. Has anyone seen this problem before and what could be the problem. I don't know how to do motherboard repairs.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
1件のコメント

Having the exact same problem. My housing has been bent for a while. One of my friends dropped my phone and the entire screen came off. When I put the screen back in, it kept saying "Searching." My friend who worked on phones claims it is the logic board antenna, but I just wanted to make sure since the description of it only talks about Wi-Fi and GPS connection.

さんによる

コメントを追加

1 件の回答

ベストアンサー

Yeah. I would check the Lightning dock

iPhone 6 のLightningコネクターアセンブリの交換

iPhone 6 Lightning Connector and Headphone Jack

iPhone 6 Lightning Connector and Headphone Jackの画像

製品

iPhone 6 Lightning Connector and Headphone Jack

$19.99

このアンサーは役に立ちましたか?

スコア 3

2 件のコメント:

I don't know much about hardware, but why would changing the lightning dock help me get cellular service?

さんによる

There's a cable on the Lightning dock, that connects to the logic board. That's how you get cell signal. Basically. If it was bent on the bottom, and didn't damage the logic board, then you're Lightning dock is damaged, and you aren't able to get signal

さんによる

コメントを追加

回答を追加する

Dewells さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 3

今までの合計 899