Problem

評価: 1

3

オプション

Problem

Hi my name is leandro i have a Ibook G3 14 and i was having a issue with the display so i tried to fix it puting a shim in the diplay chip but now after all my computer doesnt turn on after I finish and i dont no why. it was all ok before that i had problem with a blue and white cable near the Modem that was conecte to the keyboard palm rest or the turning on button the socket was out and i put it again i dont no why it does not turn on you think i forgot something else? thank you!!

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

6件の回答

ベストアンサー

rdklinc @rdklinc

評価: 32.4千

RDKL, Inc.

207

156

62

オプション

I'm not sure I understand the description of the problem, but one thing I would recommend is keeping the computer open, i.e. just let the topcase/rest on top the board while it is plugged in. That way, you can verify your connections, try powering it on, unplug/plug in another connection, try powering it on, etc. Nothing is more frustrating that putting an iBook all the way back together only to realize something else is wrong and you have to go back in again.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

QEII Student IT @qeiistudentit

QEII Student IT @qeiistudentit 評価: 4.8千 28 30 5 · Answer 1 · 2009-12-13T10:12:01-07:00

最も参考になった回答

評価: 4.8千

28

30

5

オプション

I would try soldering two wires to the contacts on the board and soldering the power button port to the end of the two wires.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

2 件のコメント:

You think this is the problem?

superbat さんによる2009年12月13日

I'm not sure I fully understand but if your power button connector socket has come off the logic board you could definitely try my suggestion.

QEII Student IT さんによる2009年12月13日

superbat @superbat 評価: 1 3 · Answer 2 · 2009-12-13T09:54:12-07:00

評価: 1

3

オプション

Well i am just making like contact with the base with something to see if its turning on is not solded.

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

1件のコメント:

You mean the port isn't soldered onto the board?

QEII Student IT さんによる2009年12月13日

superbat @superbat 評価: 1 3 · Answer 3 · 2009-12-13T09:58:24-07:00

評価: 1

3

オプション

yes i mean that but i think that it should turn on making contact with the board with something.

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

superbat @superbat 評価: 1 3 · Answer 4 · 2009-12-13T11:46:45-07:00

評価: 1

3

オプション

There is no way to turn on teh computer like in other way or with a trick?

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

Ashok Singh @ashoksingh25127

Ashok Singh @ashoksingh25127 評価: 1 · Answer 5 · 2021-04-02T20:56:12-07:00

評価: 1

投稿日: 2021年4月2日

オプション

I don't know I comprehend the depiction of the issue, however one thing I would suggest is keeping the PC open, for example just let the topcase/lay on top the board while it is connected. That way, you can confirm your associations, take a stab at controlling it on, unplug/plug in another association, have a go at driving it on, and so forth Nothing is seriously baffling that putting an iBook right back together just to acknowledge something different isn't right and you need to return in once more. Source

このアンサーは役に立ちましたか？

はいいいえ

スコア 0