修理を始めるには コミュニティ ストア

Mid 2009 モデル番号A1278 / 2.26、2.53 GHz Core 2 DuoプロセッサーEMC 2326

745回答 すべてを表示

オプション

Mother Board : S.O.S.

I tried an impossible repair for a customer

MacBook Pro Mid 2009

After updating interrupted, does not start. The motherboard is SOS: 3 long beeps, 3 short and 3 long

I tried everything I believe:

Reinstalling Firmware 1.7 for this model, the CD is rejected (I burned CD 3: the same)

Replacing RAM: Nothing

Replaced the battery, disconnected the battery ...

Unable to start external hard disk or DVD with install., The keyboard is not functional.

If someone in another track, I'm interested, but obviously replace the motherboard!

Firmware Pb, pb Burning CDs or DVDs

Big thank you in advance

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア -1
2 件のコメント

What was being updated here: the firmware, OS or hardware?

さんによる

Mac Os update only

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

From what I understand the logic board may be pooched. I know of no way to DIY correct this... a logic board repair business might be able to replace/re-flash the firmware chip... but the shade tree fix (if the reload failed) would be to replace the logic board.

If this Answer is helpful please remember to return and mark it Accepted.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

2 件のコメント:

I think unfortunately you're right :(

さんによる

Firmware/EFI chip changed and it works fine, Thanks

さんによる

コメントを追加

オプション

I don't remember seeing the OS installer do a firmware upgrade in the update process. So I'm not sure why your system bit the big one here when you were only upgrading the OS. What OS-X are you installing?

Review this Apple TN on the Beep Codes iMac (Mid 2007) and later models: About startup tones By this your Firmware is in the process of being updated. So it is likely looking for the image file on the HD or DVD you where installing the OS from. Put everything back together and as you were doing the upgrade and see if you can get the process to complete.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

2 件のコメント:

Yea sometimes the firmware seems to take unusually long, and, you must let it restart (possibly more than once) on its own until it stops at the login/desktop (however you have it set up).

さんによる

Mikhrych - Can you give us details on what did it. Did you just let the process complete or did you have to physically swap out the EEPROM after loading it with the firmware.

さんによる

コメントを追加

回答を追加する

Mikhrych さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 9

今までの合計 744