質問
-
screen not responding after replacement with low memory - HELP!I replaced digitizer and LCD assembly on a Galaxy S4. It seemed to work fine initially, but client brought it back saying...
-
Help! prep for motherboard/logicboard replaceI need to replace the motherboard/logicboard on a galaxy SIII but I want to make sure the prep before and after...
-
prep before/after motherboard replacementI need to replace the motherboard/logicboard on a galaxy SIII but I want to make sure the prep before and after...
-
Brainstorm: iPad2 was dropped, now black LCD but backlight worksA dropped iPad 2 has been brought to me by a client. LCD screen is black but backlight turns on. I did some research and...
-
Replaced proximity/power button flex cable and now won't chargeI replaced the proximity sensor/power button flex cable on an iPhone 4S. the power button now works, but for some reason...
-
screen turning off while in useI have a MyTouch 4G Slide of which I replaced the flex cable that connects the logic board to the screen and the touch...
-
HTC MyTouch 4G Slide bottom of screen will not respond?I replaced a torn ribbon that connects the logic board to the LCD, digitizer, and keyboard. Now the bottom of the screen...
-
Problems after replacing PCB flex ribbon on HTC MyTouch 4G Slide?A client of mine somehow tore the flex ribbon that attaches the keyboard and logic board side to the LCD/digitizer. The...
-
Screwhole stripped, not the screwDuring a LCD/digitizer replacement, I seemed to have stripped the four corner screw holes for the LCD, which is really...
-
White Screen after wifi replacementThe wifi antenna was not working properly on my iPod Touch 4th gen. In the process of disassembling the iPod, i...
回答
-
"brighntess low and never go up"に関する回答Check and make sure no jumpers on the logic board aren't broken or missing. Try a soft reset, then a hard reset. Make sure the display connections are fully connected. Reseat them if you have to. Make sure the pins on the display connections on the logic board aren't bent or broken.
-
"Touch screen wont move, even after replacement"に関する回答Something similar happened to me but I later found out that the phone was exposed to liquid (albeit briefly). Another instance was I somehow broke off a microscopic piece on the logic board. Get a really strong magnifier and look at the logic board to make sure no jumpers,etc.have broken off. If you see something missing/damaged, it'll need to be microsoldered back on. Also look at the digitizer connection on the logic board to make sure any of the pins haven't been bent or broken. Age of the phone doesn't necessarily doom the phone, just the condition of it. Good luck and I hope I helped.
-
"Brand new screen is not working."に関する回答Sounds like the screen is of poor quality. Get another one from a reputable seller. You sure the friend didn't drop it again?
-
"Won't charge after replacing Screen"に関する回答This happened to me with a different version of iPhone. Long story short what happened is that I somehow broke off a very tiny jumper right next to where the battery connects to the logic board. If you have a magnifier with light, open the phone and inspect the logic board very carefully for broken/missing jumpers. You won't be able to see anything without the magnifier. If that's the case, you'll need to micro-solder to fix it. Sorry, this is more likely the problem if a battery change doesn't fix the charging issue. Hope this helps.
-
"My ipad is not pulling up safari"に関する回答are you getting an error message? is safari locking up? what exactly is happening, even if you say "i tap the icon and nothing happens"? if you go to a bookmark or a link on an email, does it still open safari or no? I need more information. sorry and thanks.
-
"Why is my phone saying no service?"に関する回答The antenna is on the top left hand side of the phone and partially stuck onto the screen. You can easily damage it if you are not careful. It could also be disconnected from the logic board. make sure it's attached to the underside of the logic board. if it still says no service, then replace it. it's a pretty cheap part, only about a couple of bucks. Last resort, logic board could also be damaged (uh oh), but I say try replacing the antenna first. As for the back glass, just make sure no wires or other screws are blocking the back glass or that the slots on the back glass are not broken or bent.
-
"What can I do with an iPod that won't scroll?"に関する回答since you cannot go up/down, can you go left/right? since you say that you have tested another screen, could be the logic board? you sure the iPod 4G was not dropped or has water damage?
-
"How do I remove the rear casing?"に関する回答which generation? need more information on what you are trying to do.
-
"vehicle doesnt start. but has power"に関する回答did you check the alternator? battery cables intact and not damaged/broken? when you try to start, does it attempt to turn over or nothing happens? could also be your ignition is kaput. I'm not a mechanic, but something like this happened to my car and was told there was a problem with the alternator, luckily my car was still under warranty at the time.
-
"Stuck on battery charge screen after screen replacement"に関する回答Ok, if you have another battery, swap it out. also scrutinize the logic board and make absolutely sure nothing has broken off. some of those jumpers and resistors are extremely tiny. have you tried restoring using iTunes?