I used a spudger to lift the SSD so that it reached the screws. Not the best solution as the spudger applied some force on the board but it worked.
Just wondering if melting the original pads from inside the case with a flame would help to fix them in place for a little longer.
I’d like to see a little bit more detail of the image, just beneath the finger as I had a little bit of trouble with getting the wires folded back and forget how they were laid out initially.
All 3 antenna cables were disconeccted when I separated the board, the correct pins I believe are: for the WiFi antenna J3 (red-black cable), for the Bluetooth antennas J2 (grey cable) and J4 (black cable).