このユーザーはプロフィールを作成していません。
質問
This question goes for pretty much any iphone, not just the 5. Has anyone managed to develop a method which leads to...
続きを読む回答
Do you have an external DC PSU that you can power the phone from? If you do you can measure the current draw of the phone. Also, if you have a Mac, search for a program called "coconut battery" it will help you diagnose whether your battery is in need of replacing. I have also found that more often than not, when you replace a battery on a 5S, you also have to restore the phone - and no back-ups allowed. Those are some things to consider before you just dive into the motherboard
続きを読むGet a screen you know works, and connect it to your phone. If the screen works, then the cable is your problem. If a known good screen isn't working, then you know you are in need of a board level repair.
続きを読むB7000 glue, and get some mini plastic clamps to hold it in place for about an hour to set. No screen lifting, and comes up easy with a little heat if you ever need to open it again
続きを読むI'm thinking that there are a few more things you can try. In settings, general, accessibility - turn off your "noise cancelling" then try a call and see if that makes any difference Check also that holes for all 3 mics, front and back top, and then the bottom are all clear of dust / debris If all of that makes no difference, you may have a problem with the sound control IC
続きを読むI've got a few of the essential tools on order, and it's a journey I am about to embark on. I know it's going to take a lot of practice, but I'm really looking forward to getting stuck in. I really wish I could get over to NY and take Jessas practical board repair course, but that's not a luxury I can accommodate at the minute - though I would value that course over anything any collage here in the UK could offer
続きを読むMost likely they have fit a faulty screen. Return to your repairer and request that they rectify it with a good screen
続きを読むI can do, and have done several 6s and 6s plus glass only replacements using OCA... If anything they are easier than the iPhone 6 to do, because the backlight is supported by metal, making it a whole lot less flexible than the iPhone 6 LCD, which would then easily break
続きを読むHave you tried with a different lightening cable? Was the replacement battery and charge port of original Apple quality? Does iTunes throw up any error codes?
続きを読むNoise - because your fan is working overtime trying to cool the cpu Shutdown - the cpu got too hot, so the computer turned off, hopefully to avoid any serious damage It's overheating MOST LIKELY due to excess dust build up around the fan / heat sink radiator area. This is preventing the fan from dissipating the heat from the heatsink
続きを読むiMac Intel 21.5インチEMC2428のハードドライブの交換 Enjoy!! Follow these steps to change it... you can change it for any other HDD or SSD with the same interface (SATA)
続きを読むページ4の1
DannStarr Electronics
@dannstarre88465
1,183
ポイント
31
回答
0
ガイド
メンバー登録日 01/01/13
www.dannstarr.co.uk
投票
9
0