It sounds like your JBL Charge 3 might be experiencing interference or an internal issue. Here are a few things to try: (1) Reset the Speaker: Hold down the power button and volume up button simultaneously for about 10 seconds until the JBL logo blinks. (2) Update Firmware: Check if there’s a firmware update available via the JBL Connect app. (3) Check for Interference: Ensure there are no nearby devices causing interference. If these steps don’t resolve the issue, the speaker might be defective. Consider contacting JBL support for further assistance or a possible replacement.

If your Beats Pill isn’t charging, try the following steps to troubleshoot and potentially fix the issue: (1) Check the Charging Cable and Adapter: (1.1) Ensure the charging cable is properly connected to both the Beats Pill and the power source. Try using a different cable or adapter to see if that solves the problem. (2) Inspect the Charging Port: (2.1) Look for any debris or damage in the charging port. Use a soft brush or compressed air to clean it gently if needed. (3) Reset the Beats Pill: (3.1) To reset your Beats Pill, press and hold the power button for about 10 seconds until the light flashes. This can sometimes resolve charging issues. (4) Check the Battery: (4.1) If the battery is completely drained, it might take a few minutes of charging before the power indicator lights up. Leave it connected for at least 30 minutes. (5) Update Firmware: (5.1) Make sure your Beats Pill has the latest firmware. Connect it to a device and check for updates if possible. (6) Try a Different Power Source: (6.1)...