Hi everyone! I got this MBA A1932 and about a week ago my battery didn't charge at all, did a little inspection on the...

Hello everyone, I got a MBP A1990 for video editing and live music mix, but sometime ago I noticed that the fans start at...

Hi everyone, a friend had a MBP 15" A1286 Mid 2010 with sudden restarts and the report said something about kernel and GPU...

Hi everyone, a friend asked for help with his MacBook that was stuck in a boot loop, displaying only the Apple logo and a...

Hi everyone, I got a MBA 13" A2337 not turning on, did some test to figure out what is causing it not to turn on. Checked...

Hey everyone, I got an iPhone that fell flat on the back (didn't got any physical damage on the outside) after this, the...

Hello everyone, this is y mom's iPad (Device model iPad Air 2 16GB) and since the last week she's been experiencing some...

Hey everyone, I've got a MacBook Pro 14" M2 from 2021 that was running smoothly until recently. Now, it won't boot up no...

FIXED: after a very long investigation of what was causing the display failure and checking most components were working perfectly (might check the backlight capacitors, not my issue tho, the voltages were good on mine), also checked for a connector problem on the board (as Alexis mentioned) however it was clean and no external things in there, so I decided to check the display LDVS flex cable had some damage on the first pin from the right (that pin is the one in charge of the backlight voltage). Changed the flex and problem solved, I wish I could show the video used as guide to check (was great) but can't find it anymore.

Update, it was an IO board fault indeed. Disconnected the IO board to test it, and it turned on no problem.