How do I check for the circuit breaker, control board, or second fuse? The model is Whirlpool LGR4634JQ1 When the door is open, when I check the 1st and 2nd pins of the door switch I get an initial resistance of .3 ohms and then it decreases to 0 after a couple seconds but there is no continuity between the 1st and 3rd pins. When the door is closed, I get the opposite: when I check the 1st and 3rd pins of the door switch I get an initial resistance of .3 ohms and then it decreases to 0 after a couple seconds but there is no continuity between the 1st and 2nd pins I did not see a wiring diagram inside it or glued to the sides. I did not see the power cord melt somewhere or rub through inside or outside the dryer
続きを読む