markus weiher

i received a mac mini with no signs of life. there is no visual damage on the logicboard. i removed the logic board and found...

i've received a iPod Nano 1g today. the device had a huge problem - the screen was distorted when i switched to another menu ...

I know this is almost a common problem the click wheel accept the reset combination - but freezes after that. it also accepts...

I have a MacBook that won't wake up from hibernation mode. i wanted to drain the battery and let the MacBook go all the way d...

received today a AL Book seller said that it beeps 3 times, but unfortunately - it beeps 4 times (light flashes 5 times) - so...

today i changed the complete lid from a MacBook and now the MacBook won't wake up when the lid is opened - sleeping is no pro...

I have a iBook g4 with a "tiny" problem. the screen doesn't show anything - the backlight is off and if i use a flashlight th...

hi everybody, a friend of mine gave me an intel iMac with a strange issue - the iMac wont start if the lcd is connected - the...

i'm searching the part marked in the picture. is there any chance to find a new one ? the old one is dead - it gets hot after...

hi, i have 2 MacBooks here. one has a backlight problem - if i set the backlight to 100% - it switches off. the inverter is o...

jejejoey - almost correct! they switched to lead-free - thats right (to anybody who cares ->google "RoHS" for more information about that topic). the melting temperature is exactly the other way. leaded solder melts earlier then lead-free solder. the lead-free solder is "harder" - and that's why it breaks. you can read more about it on wikipedia -> http://en.wikipedia.org/wiki/Restriction...

you have to replace the lcd - it should not be that expensive ;-)

this porblem can be fixed, but not that easy. there are many companies that offer the gpu repair for the mackbook pro - the price in germany is around 149€ maybe you should search ebay or something like that

that won't work - the parts are not interchangeable

the ethernet card is only a chip on the mainboard - it's not possible to replace it with a plug and play solution Guide Step 14 in particular

i corrected the category for the mbp i think that it might not be that expensive here are the ifixit prices... aiport card 79,95 battery 109,95 keyboard 99,95 superdrive 149,95 but i'm pretty sure that you have many other options for those parts ebay.com airport card around 11 battery 26 (but this might be a pretty crappy battery) keyboard 30 suerdrive 40 those are all "buy it now" prices - auction prices can be lower.....

buying something stolen?? no, that should not be an option: read this and this and snoop a little bit around ;-)

nothing to solder there - it's an emi shield - the phone would even work without that shield (but that would not the best idea)

open the phone and check the connector from the headphone jack assembly - sometimes it's not properly seated. but it could be damaged too i would check the resistors near the connector on the logicboard - had a few phones with broken resistors! (would that check before you order a new assembly) replacing the plastic case is easy if you already stripped almost everything - but as i mentioned earlier - try to get it fixed first and then order parts - they are too expensive - especially when the rest wont work....

hi matt, i would use the motherboard guide (click) and check all the connections inside the phone - most likely is a connection poped out of the socket - but it's also possible that the soldering of a chip got damaged - but as i said - check the connections first - good luck

no, it won't fit - they are different