このユーザーはプロフィールを作成していません。
質問
I just replaced the idler arm bracket for my Craftsman lawn tractor with 46" deck and forgot to check before removing the...
続きを読む回答
I had a similar problem with my Maytag. If it is not in your manual, then go online to Google and type in the Make and model along with the words washer reset. Sometimes it is as simple as actually unplugging the washer, waiting a few minutes, plug it back in and test or do over.
続きを読むI would compare both rear wheels to see what is visually different to cause this on the one side. Is the frame lower on the one side and not the other? Might it be that a spring or shock needs replacing on the one side so there is less clearance between the frame and the wheel/tire?
続きを読むI have a 2012 Jeep Compass and found if you go on the Jeep webpage, you will find a similar forum as this with some solutions to problems.
続きを読むBatteries? I use rechargeable batteries. My Sony Cyber-shot (inexpensive early model) did that when the batteries were wearing down. I hate to state the obvious in making sure it is not the batteries, but for myself, I have found that the simplest thing is usually the answer. Good thing too because taking things apart is my last resort.
続きを読むProblem seems to be solved with repairclinic.com video again.
続きを読むYou need to cancel the print job through the printers and devices on your PC (windows) or at the very least unplug your printer to try to cancel the printjob. Another option if you have Windows, is to right click on the bottom picture of the printer and you can get to the options of cancelling the print job. Start from scratch and try the print job again (keep it simple and only tell it to print one page at first).
続きを読むI've also taken photos while the belt is still intact. Once the thing breaks it will be harder to follow the diagram in the manual and also on the tractor underside. That is literally the only thing I have not had to replace with my 8 year old Craftsman. Youtube and repairclinic.com videos have shown me how to fix things nearly every time. Thanks Sid. I'm going to copy/paste your answer for future reference. With my luck, it is bound to happen sometime soon.
続きを読むSounds like maybe changing fuel and air filters might work. I check mine twice each season and change all at least once a season. If the air filters are clogged or the fuel filter not getting enough fuel through to engine, that would stall the engine when the moving blades make the engine work harder. Is there fuel visible in the fuel filter? I guessed the fuel was not getting through properly and once changed to a new one, problem was solved.
続きを読むPossibly need a new starter? My problem was the battery after all. Are you sure the new battery was charged up?
続きを読むIf the belt is not on the right way, it will shred or even break. Belts have a flat and a curved side and they need to be threaded past the pulleys in the right way. After I got my Craftsman lawn tractor it broke in 2 years, now it has been 4 and in good condition. I think they wear after using a few seasons and loosen up which then make it wear faster.
続きを読むページ2の1
Marg
@margit
85
ポイント
18
回答
0
ガイド
メンバー登録日 07/02/17
投票
3
0