このユーザーはプロフィールを作成していません。
回答
Taken from the r/MobileRepair subreddit’s Rice Bot: “Somebody said "Rice". If you're talking about a water damaged device, I hope you know putting it in rice is just a myth. Rice is unable to pull moisture from inside your device. While waiting for the rice to do it's magic trick you're letting that moisture form corrosion. This corrosion can and will cause short circuits. If you truely would like to save your device please take it to a reputable repair shop immediately and do not try to charge or power your device on. Applying power will cause the corrosion to happen quicker by elecrolysis. If you have a removable battery please take it out. Rice is the homeopathy of mobile repair or as /r/MobileRepair calls it Holistic Phone Repair.” You need to get the phone to a shop ASAP so they can clean the corrosion and identify and other issues that it could have caused.
続きを読むIt is a known issue with the Baseband IC on the logic board, this is not a DIY repair. There are professionals that do this kind of work but it will likely cost about as much as buying another iPhone 6.
続きを読むSounds like a bad battery. Does the original one still work? If so, I’d return the new one and get another.
続きを読むI’d try testing the home button back in the original display if you can. If it works then you know the new screen is defective, if not it’s likely the home button is damaged.
続きを読むIt’s possible you got a bad battery, I’d try changing it again. Maybe this time from a different vendor.
続きを読むThat’s because those aren’t phillips screws, they’re tri-wing. Try the right screw driver. Nintendo Switchの分解
続きを読むThat’s very strange. You might have already tried reseating the charging port assembly connector, if that doesn’t work a new charging port would be the next step in troubleshooting.
続きを読むWhat do you mean by “Activate”? If you are just using your tablet on WIFI there’s nothing to activate and you don’t need any code from a receipt. If it is a cellular tablet, contact your carrier.
続きを読むThe display panel was cracked, unfortunately not worth fixing. You’ll have to buy a new TV.
続きを読むHave you tried it with the original screen to see if it works?
続きを読むページ2の1
修理ガイドのコメント
That’s definitely not the only way. I just did it with a guitar pick and heat pad. After doing a ton of Surface Pro 3’s, I think this one is actually pretty easy in comparison.
投票
21
0