Thanks! So I’ve done this twice so 50 minutes for the whole job.
I have 17 years experience. This took be almost an hour, just a note for anyone else who is doing this with the intent of charging for their services. Thanks for the manual.
I used laptopscreen.com.
Use a purpose built heating pad at 100 degree Celsius eg; https://www.aliexpress.com/item/Uyue-948...
I used a purpose built heating device at 100 degree celsius. Lower temperatures didn't work.
I would suggest getting the cable loose first as the vibrator comes out suddenly and you could break off the cable if it is still glued down.
And the answer is in here. It sits at 8.9 then ramps up when it is happy with everything. http://www.righto.com/2013/06/teardown-a...
Why is it 6.8 V and not 16V?
Why wouldn't we check the voltage here instead of later?
It took 1.5 hours to do the second one.