I have now a bad Digitizer FPC connector on motherboard that has AT&T carrier, What Motherboard replacement do I need to...

Hello, everyone! I need the Glass digitizer for a Toshiba Satellite Radius P55W-B5220 I see a few Whole LCD digitizer...

Do the replacement screen for: Apple iMac 27-inch LCD LM270WQ1-SDF1 PN: 661-7169 2012 2013 come with two connecting ribbon...

iMac 27" EMC 2546 A1419 (Late 2012) Hello, Do these replacement screen > 27-inch LCD LM270WQ1-SDF1 PN: 661-7169 < come...

OK. FYI: When you buy the Screen assembly, it only comes with one connector cable, the one shown in this correct model screen assembly on the picture Jamie uploaded. The Ribbon cable to the new Screen Display port lcd cable, 98% of the time does not come with the new Screen you order and must be purchased separately only IF, your existing one is damaged. Ask the seller if they send it with the replacement screen so you are aware if to order one! One more detail! You will need new mounting adhesive tape to reassemble your new Screen! You must buy a new set or ask the seller if they send an adhesive kit with the screen they are selling you! This will save you time after your get the screen, so you don't have to wait again for just the Adhesive to arrive, to complete your installation! If the existing Display port lcd cable on your existing screen is OK, you can just swap the old screen Display port lcd cable to the new Screen Assembly! See This interchangeable ribbon Display port lcd cable here below! The...

OK, thanks, that is what I have been seeing. I suppose one has to take the Display Port Cable from the old Screen and swap it to the new one! I was afraid in ordering because there are two ribbons to be disconnected but I guess this port ribbon is disconnected at both ends and is swap-able! Thank you Jamie, that was a quick response! Cheers

Hello, anybody know where to get the battery from?

Thank you in advance!

Hello all, how does the LCD cable get disconnected from the old screen, I am afraid of breaking it!

Do I lift anything or just pull on it?

Thank you