This is as far as I got. The top screw won’t come out. The bottom screw came out fine. Oh well, time to put everything back together again.
Before anyone starts tearing down their Thunderbolt Display to replace the Thunderbolt cable with a new one (like I did): a much easier alternative is to plug a standard Thunderbolt cable into the Thunderbolt port at the back of the display. Apparently it’ll work just fine. The only catch is if you happen to need that port for something else.
I found you need to be very patient when using the iOpener. It's worth taking your time, giving the heat time to work on the glue. When I finally got the battery out, there were some strips of glue left behind that I just cleaned off with some isopropanol before installing the new battery.
By the way, I had to run the iOpener for longer in my microwave for it to get hot enough. When it was too hot to touch, I figured it was hot enough for the batteries.
Pentalobe is only for the screws on the bottom cover. The Torx screw driver is for the remainder.
Thanks to this guide I saved my broken MacBook Pro from a coffee spill that killed the battery. It cost me about 30% compared to what it would have cost to have the battery changed at an Apple authorized repair center. It wasn't easy to do, but that just made it all the more satisfying.
One comment: the new battery pack I bought came attached to a thin film which had to be removed. I unfortunately tore off some of the strips of glue attached to the back of the battery cells, before getting the hang of it. No big deal. But if you have to do the same thing: peel slowly.
コメント "iPhone 5s Camera Bracket Replacement"を書き込みました。
コメント "Apple Thunderbolt Display Teardown"を書き込みました。
iPhone 6s LCD and Digitizer Replacementは完了しました。
コメント "iOpener Heating"を書き込みました。
コメント "MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement"を書き込みました。
コメント "MacBook Pro 13" Retina Display Early 2015 Battery Replacement"を書き込みました。
MacBook Pro 13" Retina Display Early 2015 Battery Replacementは完了しました。