A client brought in a PS3 - fat 40GB. The problem was, when it is switched on, it goes to green light, then flashes blue,...

This is my first time changing a Mac Hard drive for a client. Their hard drive isn't working (getting the folder icon on...

I have a screen separating machine and have had a go for the first time. The separating part is quite easy (apart from...

Hi. I'm good with PC's but a noob with MACs. My friend bought a macbook 1,1 mid 2006 and an IMAC from a car boot sale but...

I have managed to fix mine by getting the solution from another issue and trying it with this. 1. Switch the phone off, leave the sim card in and put inside a zip seal sandwich bag. (I put in inside another one for extra protection from moisture). 2. Put it in the freezer for 45-60 mins. (really, the phone won't break). 3. Take it out of the freezer and the bags and switch it on. 4. Try to activate again, the message might come up again, but this time it let me bypass it. 5. Get to the home screen as fast as possible so ignore any apple sign in requests. 6. When you get to the home screen. Switch the phone off, wipe off the condensation and put place somewhere warm for an hour so there will be no water damage. It worked for me. Your "searching problem" will probably be fixed by replacing the antenna.

I managed to fix mine! Problem was that I snapped the ribbon cable when changing the screen so I had to buy another one and replace it. I kept the same home button. The pin code was tried too many times so I had to restore the phone but got error 53. So it seems the ribbon cable effects this too. FIX: 1. Unplug the ribbon cable connector and home connector (i.e both ends). 2. Try to restore through Itunes. 3. You will probably get the error 53 so switch off the iphone and unplug from PC. 4. Reinsert the home button and ribbon on both ends. 5. Switch on again and attempt itunes restore. It sounds simple and illogical but it worked for me. Definitely worth a try. Remember my home button is original so I don't know if it works for that but for unoriginal ribbons it did. TIP TO SAVE TIME: When you have downloaded the restore firmware once, you don't have to do it again. On the next attempt, just hold SHIFT and click the RESTORE button. Then find the firmware file in the following folder:...