Xbox One Wireless Controller Model 1708 Top Motherboard Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語

日本語

手順 2を翻訳中

手順2

De-soldering required

Firmly grasp the top and bottom motherboards in opposite hands, then gently pull them apart.
The top motherboard is still connected to the bottom motherboard. To fully separate the top motherboard, you will need to use a soldering iron.
Warning: Do not attempt to disconnect the shielded (gold colored) connector as it is extremely fragile you will break it. It runs between the two boards.
De-solder the shielded cable from the lower board instead of attempting to disconnect the connector. De-solder using micro soldering techniquest.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。