メインコンテンツにスキップ

iMac Intel 21.5インチ Retina 4K Display (2017) 電源ユニットの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iMac Intel 21.5" Retina 4K Display (2017) Power Supply Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" Retina 4K Display (2017) Power Supply Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" Retina 4K Display (2017) Power Supply Replacement: 手順 0、 3の画像 3
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.

次の手順では、電源ユニットの露出面に手を近づけます。 電源ユニットの表面または露出したはんだ部分に触れないでください。触れてしまうと、ボードに取り付けられた多くの大型コンデンサからの高圧ショックを受けてしまう危険性があります。

スパッジャーの先端を使用して、電源ボタンケーブルコネクタの両側を押し、ソケットからゆっくりと引き出します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります