メインコンテンツにスキップ

iPad Pro 12.9インチ ディスプレイアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 21を翻訳中

手順21
iPad Pro 12.9" Display Assembly Replacement: 手順 0、 2の画像 1 iPad Pro 12.9" Display Assembly Replacement: 手順 0、 2の画像 2
  • After you slice below the home button, reinsert the tip of an opening pick or a halberd spudger blade 1/4" into the lower edge.

  • Slice along the lower edge until you reach the opening pick.

ホームボタンの下をスライスした後、開口ピックまたはハルバードのスパッジャーのブレードの先端を0.5cm下端に再度差し込みます。

下側の縁に沿って、開口部のピックに達するまでスライスします。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります