メインコンテンツにスキップ

iPhoneの液体侵入ダメージの修理

英語
日本語

手順 12を翻訳中

手順12
iPhone Liquid Damage Repair: 手順 0、 1の画像 1
  • Turn on your phone and watch for any smoke, strange noises, or burning smells. Check the battery and look for any swelling.

  • If something seems wrong, immediately disconnect the battery.

  • Test all the buttons and features (such as the microphone, speakers, wireless connectivity, camera, etc.).

  • Note any component or feature that doesn’t seem to be working. If anything isn’t working, disassemble the phone and check for obvious problems, such as a broken logic board component or corrosion on the cable contacts—or even an error in reassembly.

電源を入れて、煙、奇妙な音、焦げたような臭いがないか確認します。 バッテリーをチェックして、膨張していないか調べます。

何か問題がある場合は、すぐにバッテリーの接続を外してください。

すべてのボタンと機能 (マイク、スピーカー、ワイヤレス接続、カメラなど)を点検します。

反応しないコンポーネントがないか注意してください。 問題が解決しない場合は、デバイスを分解して、ロジックボードにダメージが入っていたり、ケーブル接点が腐食していたり、再組み立ての間違いなど、問題がないか確認してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります