手順 6を翻訳中
手順6
-
Draw 5 ml of fluid into the second RockShox bleed syringe. Hold the syringe upright, cover the tip with a shop towel, and gently depress the plunger to purge any air bubbles from the syringe.
-
Remove the bleed screw at the seat post and thread the standard syringe bleed fitting into the seat post bleed port.
-
Depress the remote syringe plunger while pulling the seatpost syringe plunger out.
-
Depress the seatpost syringe plunger while pulling the remote syringe plunger out. Repeat these steps until bubbles are no longer pulled from the remote and seatpost.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。