メインコンテンツにスキップ

Remplacement de la coque arrière du Sony Xperia Z3

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
フランス語

手順 1を翻訳中

手順1
Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 1 Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 2 Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 3
  • Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.

  • If you use an iOpener, follow these instructions for use.

  • Lift up the back cover with a suction handle and put an opening pick in the gap.

  • Move the pick carefully around the edges to loosen the adhesive on every side of the phone.

  • Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

Faites chauffer la coque arrière de votre Xperia Z3 pour ramollir l'adhésif en dessous.

Soulevez la coque arrière à l'aide d'une ventouse avec poignée et insérez un médiator dans l'interstice.

Faites glisser le médiator soigneusement autour des bords pour ramollir l'adhésif de chaque côté du téléphone.

Evitez d'insérer le médiator trop profondément sous la coque arrière pour ne pas endommager des composants à l'intérieur du téléphone.

[* black] Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.
+ [* icon_note] If you use an iOpener, follow these [guide|11677|instructions] for use.
[* black] Lift up the back cover with a suction handle and put an opening pick in the gap.
[* black] Move the pick carefully around the edges to loosen the adhesive on every side of the phone.
[* icon_caution] Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります