メインコンテンツにスキップ

Sony Xperia Z3 Rückabdeckung auswechseln

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
ドイツ語

手順 1を翻訳中

手順1
Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 1 Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 2 Sony Xperia Z3 Back Cover Replacement: 手順 0、 3の画像 3
  • Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.

  • If you use an iOpener, follow these instructions for use.

  • Lift up the back cover with a suction handle and put an opening pick in the gap.

  • Move the pick carefully around the edges to loosen the adhesive on every side of the phone.

  • Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

Erhitze die Rückabdeckung deines Sony Xperia Z3, um den darunterliegenden Klebstoff zu lösen.

Hebe die Rückabdeckung mit einem Saugnapf an, damit ein Schlitz zwischen Rückabdeckung und Mittelrahmen entsteht.

Bewege vorsichtig ein Plektrum in dem Schlitz entlang um die Ecken herum und entlang der Seiten des Smartphones, um den Klebstoff zu trennen.

Führe das Plektrum nicht zu tief ein, sonst könntest du kleine Komponenten innerhalb des Telefons beschädigen.

[* black] Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.
+ [* icon_note] If you use an iOpener, follow these [guide|11677|instructions] for use.
[* black] Lift up the back cover with a suction handle and put an opening pick in the gap.
[* black] Move the pick carefully around the edges to loosen the adhesive on every side of the phone.
[* icon_caution] Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります