(Windows) Installing a HP LaserJet Printer using the HP UPD

ガイドに戻る

英語

日本語

前の手順次の手順

手順 4を翻訳中

手順4

(Windows) Installing a HP LaserJet Printer using the HP UPD, Dynamic Mode - Driver installation: 手順 0、 3の画像 1

(Windows) Installing a HP LaserJet Printer using the HP UPD, Dynamic Mode - Driver installation: 手順 0、 3の画像 2

(Windows) Installing a HP LaserJet Printer using the HP UPD, Dynamic Mode - Driver installation: 手順 0、 3の画像 3

Dynamic Mode - Driver installation

While Windows 7 is being shown here, the same steps apply in Windows 10 and 11.
This installation method only works with networked printers. USB IS NOT SUPPORTED.
After the driver loads, agree to the license.
Once you agree to the license, you will be asked which installation mode you want to use. Select Dynamic Mode and click Next.
After selecting Dynamic Mode, click Next. The printer driver will be installed alongside a "universal printer".
Once the driver is installed, manual configuration and a static IP address on the printer are REQUIRED. The printer is configured via IP address with this method.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。