How to set up your Strive AL 6.0 Race

英語

日本語

手順 4を翻訳中

手順4

Saddle montage

Attaching the saddle to the frame is a piece of cake. Take the saddle and apply assembly paste to the bottom part of the seat post, around the clamping area of it and inside the seat tube.
Slide the saddle into the seat tube while pulling out the cable at the lower end of the tube.
Note the minimum and maximum height markings on the seat post.
Tighten the bolt of the clamp with the torque wrench.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。