メインコンテンツにスキップ

iPad Air セルラーモデルのロジックボードの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 20を翻訳中

手順20
iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 2
  • Continue peeling up the tape away until there is enough slack in the left speaker cable to disconnect it.

  • Do not completely remove the tape—it will be easier to replace if you leave a section still attached to the rear case.

左側のスピーカーケーブルの接続を外すために十分なたるみが出来るまでテープを引っ張り続けます。

テープを完全に外さないでください。テープがまだ背面ケースについたままで交換する方が簡単です。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります