メインコンテンツにスキップ

Nintendo WiiのDVDドライブの交換

英語
日本語

手順 1を翻訳中

手順1
Nintendo Wii DVD Drive Replacement: 手順 0、 3の画像 1 Nintendo Wii DVD Drive Replacement: 手順 0、 3の画像 2 Nintendo Wii DVD Drive Replacement: 手順 0、 3の画像 3
  • The following steps are only necessary if your replacement Wii DVD drive does not include the four rubber grommets along the front and rear of the DVD drive housing.

  • Insert the tip of a long, skinny screwdriver into the hole in the center of the first grommet on the rear of the DVD drive housing.

  • Pull the grommet straight away from the DVD drive housing until it is free.

お持ちのWiiの内蔵DVDドライブの正面と背面に沿って4つの「はと目金」が付けられていない場合は、次の手順を割愛してください。

細長いドライバーを内蔵DVDドライブの背面に付けられた一番最初の「はと目金」中央の穴に差し込みます。

完全に取れるまで、はと目金を内蔵DVDドライブから引っ張ります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります