注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 7を翻訳中
手順7
-
Align the white strip on the back half of the camera with its slot on the front part of the camera.
-
Use the metal tweezers to insert the white strip into the slot. Push the strip in as far as it can go into the slot.
-
Use the metal tweezers to push the black tabs at each side of the slot toward the center. The tabs will hold the white strip in place.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。