メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 6を翻訳中

手順6
Use tweezers to peel away any remaining adhesive from both the rear glass and the phone's chassis.
  • Use tweezers to peel away any remaining adhesive from both the rear glass and the phone's chassis.

  • Then, clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Follow this guide to reinstall the rear glass.

この時点で背面ガラスのパネルは電話本体から完全に取り出せていますが接着ストリップが両側に付いたままです。

背面パネルを引き上げて完全に外します。

[* icon_note] At this point,icon_reminder] Use tweezers to peel away any remaining adhesive from both the rear glass panel should be fully separated fromand the body ofphone's chassis.
[* icon_reminder] Then, clean
the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sidessurface for the new adhesive.
[* black] Pullicon_reminder] Follow [guide|47490|this guide] to reinstall the rear panel up and away to completely separate itglass.
[* icon_note] At this point,icon_reminder] Use tweezers to peel away any remaining adhesive from both the rear glass panel should be fully separated fromand the body ofphone's chassis.
[* icon_reminder] Then, clean
the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sidessurface for the new adhesive.
[* black] Pullicon_reminder] Follow [guide|47490|this guide] to reinstall the rear panel up and away to completely separate itglass.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります