修理を始めるには コミュニティ ストア

更换三星盖乐世S6的后部玻璃面板

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての25個のガイドに反映されます。

ガイドに戻る
英語
中国語
前の手順

手順 6を翻訳中

手順6
Samsung Galaxy S6 Rear Glass Replacement: 手順 0、 2の画像 1 Samsung Galaxy S6 Rear Glass Replacement: 手順 0、 2の画像 2

  • To install new rear glass:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow this guide.

安裝新的背蓋時：

使用鑷子將所有剩餘於機身的膠撕掉

使用濃度90%以上之異丙醇配合無絨布擦拭清潔粘合區域。僅需向一個方向輕掃，不用來回擦。此步驟可以幫助新背蓋與手機更好的粘合。

把新的背蓋後面的塑膠片分離(不要太快，以免新膠隨塑膠片分離)。將背蓋的一個邊緣與手機機身對齊,並將背蓋牢牢地按在手機上。

如果您要重新安裝原來的后部玻璃面板，或者使用未預裝粘合劑的后部玻璃面板，請参考此指南。

[* icon_reminder] To install new rear glass:
- [* black] Use tweezers to peel away any remaining adhesive from the phone's chassis.
+ [* black] Use [product|IF145-020|tweezers] to peel away any remaining adhesive from the phone's chassis.
[* black] Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.
[* icon_reminder] If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。