メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての25個のガイドに反映されます。

英語
日本語

手順 6を翻訳中

手順6
To install new rear glass: Use tweezers to peel away any remaining adhesive from the phone's chassis.
  • To install new rear glass:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow this guide.

この時点で背面ガラスのパネルは電話本体から完全に取り出せていますが接着ストリップが両側に付いたままです。

背面パネルを引き上げて完全に外します。

[* icon_note] At this point, the rear glass panel should be fully separatedicon_reminder] To install new rear glass:
[* black] Use tweezers to peel away any remaining adhesive
from the body ofphone's chassis.
[* black] Clean
the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sides.
[*
surface for the new adhesive.
[*
black] PullPeel the adhesive backing off of the new rear panelglass, carefully line up one edge of the glass against the phone chassis, and away to completely separate itfirmly press the glass onto the phone.
[* icon_reminder] If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true]
.
[* icon_note] At this point, the rear glass panel should be fully separatedicon_reminder] To install new rear glass:
[* black] Use tweezers to peel away any remaining adhesive
from the body ofphone's chassis.
[* black] Clean
the phone, althoughadhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the adhesive strip may be attached to both sides.
[*
surface for the new adhesive.
[*
black] PullPeel the adhesive backing off of the new rear panelglass, carefully line up one edge of the glass against the phone chassis, and away to completely separate itfirmly press the glass onto the phone.
[* icon_reminder] If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true]
.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります