Sony SLT Alpha-65V Back Panel Disassembly

注意：あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語

日本語

手順 3を翻訳中

手順3

Be careful when pulling the back panel away as it will still be connected to the body of the camera by two strips of film.
When unscrewing the 5.0 mm screw on the dial, make sure to hold onto the dial that becomes detached after taking out the screw.
Unscrew the two 4.0 mm Phillips #00 screw at the top of the camera by the eyepiece.
Unscrew the 5.0 mm Phillips #00 screw of the dial below the other two screws.
Once all the screws are removed, carefully use your hands to detach the back panel from the camera. Working around the edges can help as well.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。