メインコンテンツにスキップ
英語
日本語

手順 12を翻訳中

手順12
Hand tighten bearing cone onto the free end of the axle, so that it touches the bearings without putting any pressure on them. Ideally, there should be no movement or give in the axle when you pull on it or try to wiggle it. Additionally, the axle should be able to spin freely in the wheel, with minimal resistance.
  • Hand tighten bearing cone onto the free end of the axle, so that it touches the bearings without putting any pressure on them.

  • Ideally, there should be no movement or give in the axle when you pull on it or try to wiggle it. Additionally, the axle should be able to spin freely in the wheel, with minimal resistance.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります