メインコンテンツにスキップ

iPhone 5sのフロントパネルアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
iPhone 5s Front Panel Assembly Replacement, Taping the display glass: 手順 0、 3の画像 1 iPhone 5s Front Panel Assembly Replacement, Taping the display glass: 手順 0、 3の画像 2 iPhone 5s Front Panel Assembly Replacement, Taping the display glass: 手順 0、 3の画像 3
Taping the display glass
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPhone's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

フロントガラスが割れている場合、ガラスに透明な補強テープを貼りましょう。作業中ガラスが飛び散ったりして怪我をしないようご注意ください。

画面全体を何重にも貼り、しっかりと固定します。

テープを表面に貼ると、画面を持ち上げた際に画面構造を保ってくれます。

修理作業中はガラスの破片が飛び散り、目に入ることがないように保護メガネを装着してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります