メインコンテンツにスキップ

iPhone 5sのフロントパネルアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
iPhone 5s Front Panel Assembly Replacement: 手順 0、 2の画像 1 iPhone 5s Front Panel Assembly Replacement: 手順 0、 2の画像 2
  • Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.

  • Pull the plastic nub to release the vacuum seal on the suction cup.

  • Remove the suction cup from the screen.

リアケースからフロントパネルアセンブリを完全に外さないでください。幾つかのリボンケーブルが本体上部と繋がった状態にします。

吸盤カップの持ち手(ノブ)を緩めて、吸盤を外します。

スクリーンから吸盤カップを外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります