メインコンテンツにスキップ

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 11を翻訳中

手順11
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 1 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 3
  • Slide the opening pick along the top edge of the iPad, stopping just before you reach the camera.

  • The third image shows where the front-facing camera and housing are in the iPad.

  • Avoid sliding the opening pick over the front-facing camera, as you may smear adhesive onto the lens or damage the camera. The following steps will detail how to best avoid disturbing the front-facing camera.

開口ピックをiPadの上端に沿ってスライドさせ、カメラに到達する直前で止めます。

3枚目の画像は、iPadの前面カメラとハウジングの位置を示しています。

接着剤がレンズに付着したり、カメラが破損したりする恐れがあります。次の手順では、前面カメラの邪魔にならないようにするための最善の方法を説明します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります