メインコンテンツにスキップ

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 1 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

挿入した最初のピックを取り、iPad上部コーナーに向けてスライドさせます。

フロントガラス越しに開口部のピックの先端が見える場合は、慌てる必要はありませんが、開口ピックを少し外側へ引き出してください。 ほとんどの場合、問題はありませんが、LCD前面に接着剤が付着してクリーニングが困難になる可能性があるため、ご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります